You're up next!
Connecting....
NOW AVAILABLE: Product-Focused Search and Guided Navigation for improved access to product support. Read more.
ZQ630 Plus RFID
- Getting Started
- Downloads
- Documentation
- Videos
- Troubleshooting
- Application Software
- Additional Resources
The Setup guidelines below will take you to English documentation. You can access the localized QUICK START GUIDE attached in printer box or in the DOCUMENTATION tab.
Using Zebra Setup Utilities (ZSU) Windows Version
IMPORTANT! Do not connect your printer to a computer yet!
- If you connected your printer to a computer via USB before driver installation, the printer might appear as an unknown (unspecified) device in “Devices and Printers.”
- If necessary, follow these recovery steps before proceeding to Step 1.
1. Download and install the Zebra Setup Utilities (ZSU) printer configuration utility.
- How to download and install ZSU from the DRIVERS section below.
- Windows Printer Driver v10 is included with the ZSU download. To install the driver, select "Install New Printer" on the ZSU interface and proceed with steps 14 to 19 in this article.
2. Connect the printer to a USB port on your computer.
3. Loading the Media (media usually means labels, but it also includes tag stock, receipt paper, and other things that can be printed on).
5. The printer settings must match the actual supplies that you are using for your print job and the options on your printer. Adjust the printer settings as necessary using Zebra Setup Utilities software or Windows Printer Driver v8.
Warranty and Repair
For some services, you will need a serial number. Here's where you can find it on your device.
